B2B Customer Needs: Predict the customer's experience with modeling B2B Customer Needs: Predict the customer’s experience with modeling
The AIM Institute > Business-to-Business (B2B) > B2B Customer Needs: Predict the customer’s experience with modeling

B2B Customer Needs: Predict the customer’s experience with modeling

Dan Adams |
How to model customer needs

How well do we understand B2B customer needs? How well is this even possible?

Consider that a model is a simplified reflection of reality… a “stand-in” for what will happen. Maps, budgets, and recipes are models. Advanced scientific models help us predict hurricanes, solar eclipses and tectonic plate shifts. A good model…

  • Incorporates all important predictive data and ignores the rest.
  • Explains the past and predicts future real-world behavior.
  • Provides cost-effective benefits in the real-world.

Your company’s relationship with customer needs lies somewhere on an “intimacy” continuum anchored by three points: We Guess, We Understand, and We Model. Before describing how to model customer needs—and why this is so important—let’s see what “guessing” and “understanding” look like.

Do you guess, understand or model customer needs?

Guessing and understanding customer needs

We recently researched the impact of B2B-optimized interviewing by 50 new-product teams from 20 prominent client companies. These teams had views of what their new products should look like before—and after—their 875 interviews. How much did these interviews impact their product designs? For only one out of every six teams was the impact “moderate” or “slight.” For five out of six teams, the impact was “great” or “significant.” (For more, see Guessing at Customer Needs at AIM Whitepapers.)

So it seems most B2B companies—without proper interviews—have a poor understanding of customer needs. They’re probably somewhere on the continuum between “guessing” and “understanding,” and probably much closer to the former. Your company is in this group if you…

Discovery and Preference Interviews New Product Blueprinting

  • Start with your own ideas instead of customers’ ideas.
  • Use customer interviews to “validate” your pre-conceived notions.
  • Only learn how your new product will sell after you launch it.

When your company moves from “guessing” to “understanding,” you eliminate two types of errors: errors of omission and errors of commission. The first is failing to uncover unarticulated customer needs, and the second is selecting the wrong customer needs to pursue.

Click here to learn more about the B2B growth tools available from AIM

For years, Blueprinting practitioners have used divergent, qualitative Discovery interviews and convergent, quantitative Preference interviews to avoid errors of omission and commission, respectively. Many teams stop after these interviews… and that may be OK if your competitors are still guessing.

But some day even lagging competitors will stop guessing and start understanding. As the Quality Wave showed, Detroit automakers eventually had to close the gap with Japanese competitors. (See Catch the Innovation Wave.) Why not build modeling skills now to put maximum daylight between you and competitors for as long as possible?

Modeling B2B customer needs

When you model B2B customer needs, you learn enough to replicate the customer experience yourself. This only works for B2B. It is the complete opposite of B2C methods, where you ask customer to react to your prototype, hypothesis, sample, conjoint survey, price survey, minimum viable product, etc. Future innovators will understand this: For markets with a low B2B Index, use customer reaction. For a high B2B Index, use customer modeling. (Calculate your market’s B2B Index for free at B2B Market View.)

You don’t need to show customers your prototype and ask what they think… because you’ve modeled how they think.

With customer needs modeling you don’t seek customer reaction. You predict it. You don’t need to show customers your prototype and ask what they think… because you’ve modeled how they think. But you can only do this by first letting your smart B2B customers make you smarter during those “understanding” interviews mentioned earlier.

Click here to learn the 7 steps of New Product Blueprinting

Just as a weather forecast model relies on key input data—barometric pressures, temperatures, and wind speeds—your interviews capture vital customer data in a measurable form. Imagine you make plastic, and customer interviews in your target market segment taught you…

  1. Cold-temperature impact resistance is important and unsatisfactory today.
  2. A good test is to drop a 1 kilogram steel ball on a test panel at -20oC.
  3. A plastic sample surviving a 100 cm drop is considered “barely acceptable.”
  4. A sample surviving a 300 cm drop would make customers “totally satisfied.”

Next you conduct side-by-side tests on competitors’ products and any pre-existing products you may have. You convert all test results (centimeters here) to a 1-to-10 scale, where 5 = barely acceptable, and 10 = totally satisfied. This yields the radar chart shown, where blue, green and violet are your toughest competitors, and grey is your pre-existing product.

B2B customer needs can be modeled with Blueprinter(R) software.
B2B customer needs can be modeled with Blueprinter(R) software.

Now the fun part: Your team imagines its first product design, shown as a red line in the radar chart. The red column in the “Outside-In” chart models how the market would react to this product vis-à-vis competitors’ products. Each column models that product’s performance (on cold-temperature impact and other outcomes) and is weighted for the importance customers assigned to each outcome. (This can all be done within Blueprinter® software.)

Seem like too much work? It probably is for minor product “tweaks.” But consider these advantages for real new product innovation:

  1. Its much cheaper and faster to perform “what if” mental experiments in the front-end of innovation than to create physical prototypes for customer evaluation in the development stage.
  2. Your testing lets you understand customers’ next best alternatives… the only way to optimize the design, pricing and promotion of your new product.
  3. Your B2B customers will be more engaged when you seek their early advice vs. lobbing your prototypes at them. And if you do create a prototype later, they’ll appreciate that you didn’t waste their evaluation time with frivolous concepts.

So should you abandon the use of prototypes? Nope, just use them later and for different reasons. Use them in the development stage instead of the front-end of innovation. And use them to continue engaging customers and refining (not guessing) your product design.

What will you do with this?

Do you believe B2B customer needs modeling will eventually become standard practice? I do, because I believe in three principles:

These three principles lead to an inescapable fact: Intimacy with customer needs is crucial to your organic growth.

  1. Your company’s only path to profitable, sustainable organic growth is creating customer value.
  2. You only create customer value by improving an important, unmet customer need (somewhere along the value chain).
  3. You cannot efficiently, effectively improve that which you do not fully comprehend.

These three principles lead to an inescapable fact: Intimacy with customer needs is crucial to your organic growth. We’d like to help you move from guessing customer needs… to understanding them… to modeling them. The single most effective way to begin is to have someone from your company join us at our next New Product Blueprinting open workshop. To learn more, visit Blueprinting Workshops.

If you’re not already practicing New Product Blueprinting, we’re pretty sure you’ll be surprised at what you’ve been missing. If that’s not the case, we’ll happily return your registration fee and congratulate you on the way you are understanding and modeling customer needs.

Categories:
Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

preload imagepreload image